降雨入渗过程的水-气二相流模型研究

本文根据多孔介质中水、气的质量守恒定律，结合多相流理论，建立了求解饱和-非饱和渗流的水-气二相流数学模型，并采用积分形式的有限差分法和NewtonRaphson迭代方法进行数值求解，提出了各种边界条件，包括水相、气相和降雨入渗边界的数学处理方法。利用上述模型对土柱试验进行模拟，将计算结果与试验数据比较，验证了模型的正确性；然后对土质边坡降雨入渗过程进行计算，得到孔隙水压力、孔隙气压力和毛细压力的变化过程，其变化规律符合实际，实现了降雨入渗的水-气二相渗流过程，为定量研究空气阻力对入渗水流的影响提供有效途径。     

Cu/ZSM-5催化剂的表征及其环己醇脱氢性能

以制备的ZSM-5分子筛为载体,采用浸渍法制备了一系列Cu负载量不同的Cu/ZSM-5催化剂。采用X射线衍射、氢气程序升温还原、吸附氨气程序升温脱附和BET等方法对Cu/ZSM-5催化剂进行了表征,用H2-N2O滴定法测定了Cu金属的比表面积和分散度。以环己醇气相脱氢制备环己酮为探针反应对Cu/ZSM-5催化剂的催化性能进行了评价。实验结果表明,Cu负载量影响Cu物种在载体表面的状态和分布,Cu是环己醇脱氢反应的活性中心,其比表面积、分散度与Cu/ZSM-5催化剂的活性相关,Cu/ZSM-5催化剂的B酸中心与环己醇脱氢反应的选择性相关。Cu质量分数5%的Cu/ZSM-5催化剂上Cu金属的比表面积较大而B酸中心较少,显示出很高的环己醇转化率(58.7%)和较好的环己酮选择性(97.2%)。     

黄埔发电厂#6发电机转冷水系统改造

黄埔发电厂#6发电机转冷水铜离子含量超标，通过对缺陷原因进行分析，针对二级水封的特性对溢出的转冷水进行回收并利用化学凝结水处理去除溶出的铜离子，通过控制转冷水的pH值最终减缓铜管的腐蚀.     

用于铜的化学机械抛光液的研究

文中介绍了一种以碱性抛光液对铜进行全局平面化的方法 ,讨论了以 Si O2 水溶胶为磨料的抛光液在Cu-CMP过程中的化学 (络合 )作用及反应机理 ,并给出了抛光液的配比及上机实验结果。结果表明 :该抛光液用于对带有阻挡层和介质层的铜抛光 ,达到了对铜层的高去除速率和高选择比 ,取得了较好的全局平面化效果     

Change in Availability of Mineral and Raw Material Resources as a Result of Scientific and Technical Progress

The tendencies characterizing worsening of natural, mining and technical, as well as mining and geological conditions of deposit mining are analyzed for the last 100 years. The change in prices for mineral raw material is shown, and the influence exerted by scientific and technical progress in the sphere of mining and processing of copper-containing ores is established. An approach to the estimate of available mineral reserves and possibility of their involvement in mining is stated.     

Some aspects of the electrochemistry of the flotation of pyrrhotite

The iron sulfide mineral, pyrrhotite (Fe_(1–x)S), has long been known to be more difficult to recover by flotation from alkaline slurries than many other base metal sulfide minerals. This paper summarizes the results of an electrochemical study of the surface reactions that occur during the flotation of nickeliferous pyrrhotite in the recovery of nickel and the platinum group metals. Mixed potential measurements conducted with natural pyrrhotite electrodes in various stages of an operating flotation plant showed that the mineral potential is positive to the equilibrium potential of the xanthate/dixanthogen couple. Similar results were obtained during batch flotation experiments and in synthetic solutions in the laboratory. Cyclic voltammetric and potentiostatic current/time transient experiments were used to investigate the oxidation of pyrrhotite under various conditions. In addition, the reduction of oxygen, the reaction of copper ions and the oxidation of xanthate ions at the mineral surface were investigated. The formation of dixanthogen on pyrrhotite surfaces is thermodynamically favourable in plant flotation slurries. However the interaction with xanthate at pH values above 7 is inhibited by a surface species formed during the conditioning prior to xanthate addition. In acidic solutions copper ions react readily with pyrrhotite to form a species, possibly CuS that can be oxidized at potentials above 0.4 V. At pH 9 this species does not form and there is no electrochemical reaction between pyrrhotite and copper ions. The beneficial effects of copper ions to flotation performance appear to be related to an enhancement of the oxidation of xanthate.     

氨荒酸盐抑制铜在NaCl溶液中腐蚀的电化学研究

通过电化学极化曲线和失重实验,研究了氨荒酸盐对铜在氯化钠溶液中的缓蚀性能,并与相应胺的缓蚀性能进行了对比。结果表明:氨荒酸盐对铜具有较好的缓蚀性能。     

Resilient metal spring network silicone-matrix composite for separable interconnections

Resilient metal spring silicone-matrix conducting composites for separable interconnections in electronics were fabricated by the impregnation of silicone into a preform comprising randomly oriented C-shaped Cu-Be springs and a small proportion of Sn-Pb solder, which served to connect the springs at some of their intersections. Composites containing 6.1-9.8 vol.% total filler exhibited volume electrical resistivity 0.5-1.0 mΩ.cm and contact resistivity (with copper) 11-17 mΩ.cm². A compressive stress of about 30 kPa was needed for the low contact resistivity to be reached. The volume 17-26% and the contact resistivity increased by 5% after heating in air at 130-150°C for seven days. Composites containing <9 vol.% total filler showed no stress relaxation for seven days at 6.0% strain.     

无染料酸性镀铜添加剂的发展状况

综述了无染料酸性镀铜添加剂MN系列的发展状况及几类无染料添加剂的优点和不足,比较了无染料系列添加剂与有机染料系列的性能差异,对目前最好的无染料添加剂系列EPI进行了简要的介绍,并展望了未来添加剂的发展方向.     

Ermüdungsverhalten und Dauerfestigkeit von Graphit und Aluminium – infiltriertem Graphit

Fatigue behaviour and endurance limit of graphite and of aluminium‐infiltrated graphite Fatigue properties of polycrystalline, isotropic graphite FU2590 and of FU2590 infiltrated with AlSi7Mg (FU2590/AlSi7Mg) were investigated in reversed bending tests at 25 Hz at numbers of cycles below 10⁷ and in tension‐compression tests at 20 kHz below 10⁹ cycles. The open porosity of Graphite (10‐11 Vol.‐%) was infiltrated with the aluminium alloy using the squeeze casting infiltration method, which led to an increase of the bending strength by 50 %, increase of tensile strength by 30 % and increase of stiffness by 15 %. Fully reversed tension‐compression loading of FU2590 delivers a mean endurance limit at 10⁹ cycles at the normalized maximum stresses (i.e. maximum tension stress of a cycle divided by the static strength) of 0,65±0,03. Mean numbers of cycles to failure of 10⁴ were found in fully reversed bending tests at the normalized maximum stress of 0,78. The infiltrated material shows approximately 30 % higher cyclic strength in reversed bending tests, and the mean endurance limit under tension compression loading increases by 15 %. The increased endurance limit of the infiltrated material is caused by the increased stiffness. The increased toughness of graphite due to the infiltration with aluminium is of additional beneficial influence at the higher cyclic stresses investigated in reversed bending tests and in static tests.